ATC is not a large company but it seems to have penetrated an unseemly amount of recording studios with its monitors, mainly because they are built to withstand the abuse and deliver the resolution demanded of pro monitors. A year or two back they even managed to usurp a major US brand, replacing the PA system at Disney Hall, home of the Los Angeles Philharmonic. Which given the fact that the homegrown competitor had donated its speakers in the first place is quite a coup. The names David and Goliath come to mind.
But despite its success in that domain ATC is not just a pro company, it also makes a wide range of loudspeakers for the discerning music lover to use at home, the sort who are more interested in sound quality than high-tech features and shiny badges. In fact the people who run ATC give every appearance of having little concern whether the speakers sell in the domestic market or not. But every now and again they bring out a new model, and about a year back, brought out a whole new range, which is something of a first. This so called Entry Series consists of four designs ranging from the compact £499 SCM 7 to the £1,999 SCM 40 floorstander, bringing the entry price for the brand to its lowest ever point. The SCM 19 sits just below the 40 in the range and is the biggest stand-mount. It’s also about the heaviest stand-mount I’ve ever had to shift around. There’s something disconcerting about its mass (16kg) which seems far too great given its size. If this were a floorstander one’s perceptions wouldn’t be quite so confused but it ain’t and they are. Every time I pick one of these up it seems too heavy!
This has more than a little to do with the excessive size of the magnet system on the main driver, which weighs more than half as much as the speaker overall. It’s the same motor assembly that you find on ATC’s 12inch bass drivers where such mass appears to make more sense. But if you want control, and I do want control, then this brute force approach is very effective. The reason for such a large magnet/ motor assembly is to give the short voice coil a long gap to work in, one that’s long enough for the flat wire coil to remain in the grip of the magnet. This is an expensive way of doing things but it does deliver the sort of results you need if a drive unit is going to be used all day at high SPLs.
The price is both fiscal and electrical: this is a pretty low sensitivity system by most standards and you’ll need a pretty powerful amplifier to make the most of it. But ATC argue that Watts are cheap and besides, at least their speakers are far from a difficult load. Even so, SETs won’t cut it, so if that’s your bag, these speakers probably aren’t.
What ATC speakers are all about is resolution and this cannot be achieved with a coloured balance. That mean neutrality and you need an amplifier that pulls in the same direction. If you want colour in your music look for it in the source material, and while tonally colourful hi-fi can be tremendously entertaining it can ultimately do a disservice to that music by subtly remixing it. In some respects this makes ATCs rather unforgiving where recording quality is concerned. A lot of great music was not that well recorded, some of it being heavily compressed or just plain distorted. Jose Gonzalez’s fabulous Veneer is a good example of a very poor recording of beautiful music, so you want to listen to it but a softer speaker will make less of the problems. On the other hand it is unfair to ask a speaker to be true, resolute and accommodating of poor quality source material.
Physically the SCM 19 is not that different from its SCM 20 predecessor, even the size is the same 20 litres (apparently the name change was simply to differentiate the two models). The main driver is one of ATC’s SL or super linear varieties and uses a doped paper cone with an integral 75mm dust cap. The tweeter is a 25mm soft dome with neodymium magnet and an alloy wave guide, the latter element improving sensitivity and helping to even out the response. The MDF cabinet is made in the Far-East to keep costs down, allowing more budget for the drivers. Mass may not be everything in a loudspeaker but it generally relates to magnet size and you won’t find another bookshelf design near this price point that weighs as much as the SCM 19. The front baffle is doubled up and gently radiused to reduce diffraction and the new SCMs are designed to be used without the grilles in place.
Compared to its predecessor the SCM 19 seems to be a slightly smoother but more resolute loudspeaker. Earlier ATC passives could be a little crude and abrasive for some tastes, but the changes seem to have resulted in a more refined and resolute speaker that is hugely capable and immensely revealing for its price. Capable that is in terms of the level it can comfortably be used at and in the breadth of bandwidth it delivers. The style of delivery is typically analytical and this is not a smooth or overly refined loudspeaker; it is an honest and revealing one. You can get speakers that are more obviously open, and if you pay a bit more there are more refined alternatives, but in terms of the detail in the recording you have to pay a lot more to hear deeper into the mix.