Unboxing - The New High Resolution Technologies iStreamer

Posted by: Steven Stone at 10:10 am, December 16th, 2010

 The iStreamer is HRT's newest product. It is a DAC designed to work with the iPod, iPod Touch, or iPhone. 
 
Here's the box
 

 

 
The first thing that will greet you upon opening the box is this
 

 

 
Here's the iStreamer with four little black rubber feet you can install
 

 

 
Here's everything that was in the box
 

 
Can you tell what's missing?
 
Here's a hint
 

 
That's a pretty standard AC connector. I've got a drawer full of 'em. Fortunately, if you look in the corner of the white box you will find an AC connector. The iStreamer needs to get power from somewhere, and the iPod doesn't have sufficient power to run the iStreamer, so you need to connect an additional cable for AC power. 
 
Here's a shot with the two necessary cables plugged into the iStreamer
 

 
Here's one last shot showing the iStreamer and the AC power unit. THe unit can also charge your iPod or anyother device that gets power via a USB cable. Nice.
 

Comments

MikeMercer -- Thu, 12/16/2010 - 13:02

Nice pictures as ALWAYS!!
You power the iStreamer thru the A to mini B USB cable (included); plug the A connector into the AC PS and the Mini B into the iStreamer - you're GOOD!  The wall-wart just happens to have a figure-8 as well (you can use it for multiple charging situations). 
And the iStreamer also charges the iDevice - plus it supports OTHER IPODS AS WELL AS THE TOUCH! All supported Ipod models are indicated on the box, below the "Made for iPod, iPhone, iPad" logo)
 
ThanX for the quick coverage Steven! We look forward to your review!

All content, design, and layout are Copyright © 1999 - 2011 NextScreen. All Rights Reserved.
Reproduction in whole or part in any form or medium without specific written permission is prohibited.