LAS VEGAS, Jan. 10, 2012 -- Dynaudio, the Danish based high end loudspeaker specialist, is proud to introduce the new Xeo loudspeakers, the world's first true high end wireless loudspeaker system at the 2012 International CES in Las Vegas. Comprised of two models, the compact Xeo 3 bookshelf monitor and the slim Xeo 5 floor stander, the Xeo models are wireless, remote controlled active loudspeakers offering the convenience of wireless operation in a fully active loudspeaker concept with the sound quality that Dynaudio has become renowned for. Both models utilize high performance Dynaudio drive units powered by integrated digital amplifiers featuring digital sound processing.
The Xeo has been designed to deliver true high end sound quality, while the wireless active loudspeaker concept helps to achieve an incredibly high level of value in that there is no additional cost of amplification or cabling. The tweeters are 27 mm soft dome designs with Dynaudio's precision coating, while the long-throw mid/woofers are 14.5 cm drivers featuring Dynaudio's proprietary MSP (Magnesium Silicate Polymer) cones. The Xeo sonic performance is open, detailed, accurate and dynamic with perfect timing. According to Dynaudio founder and CEO Wilfried Ehrenholz, "Xeo is Dynaudio's answer to an ever changing marketplace. This new product range exists as there has been a drastic shift in how customers are listening to music. Of course, audiophiles will always be driven by performance and absolute sound quality, but there are also customers who may not even know the audiophile market exists but are interested in quality product design, innovative technology, and better convenience in audio products." "With the Xeo, Dynaudio aims to bring the high performance sound that the audiophile market requires in line with today's demands of a wider audience who is interested in intelligent designs, the latest technologies and a simple and convenient platform to listen to music in higher sound quality. First and foremost, Xeo is wireless audio. But it is wireless high end, which means Xeo is also a true Dynaudio."
No loudspeaker cables, no D/A converters, no amplifiers, no set-up software, no plug-in or no IP address are needed: the Xeo 3 and Xeo 5 loudspeakers receive the music signal digitally from the Xeo wireless transmitter, and process the signal digitally until amplification. The Xeo loudspeakers receive the most pure, unchanged music signal there is, mating this to advanced Dynaudio driver technology, which itself has become renowned in audiophile circles. Thus the Xeo is a true high performance audiophile speaker system, simply the first to offer such wireless connectivity. Setting up and operating the Xeo is as simple as unpack and play. Each Xeo loudspeaker set is supplied with a Xeo transmitter and a remote control, with the transmitter communicating to the internal amplifier in the loudspeaker, with no need for any further connection to a router or LAN. The Xeo speakers only need to be connected to the mains power, and the Xeo Transmitter connected to the sound source.
The Xeo Transmitter converts a digital, wireless signal, sending such at full CD resolution (up to 16 bit/48 kHz) to the Xeo 3 or Xeo 5 loudspeakers. The Xeo Transmitter even supports files up to 24 bit/48 kHz. Depending on room shapes and wall construction, one Transmitter can send the signal up to 50 meters, or up to 100 meters in spaces without any boundaries. The Xeo remote control allows for source selection between the three available inputs as well as powering the speakers on, setting the volume level, choosing an audio source, and switching the speakers off.
Essentially replacing the functions of D/A converters, sound cards, preamplifiers and speaker cables, the Xeo Transmitter is an electronic device that receives music from a connected sound source and wirelessly transmits it, uncompressed, to the Xeo loudspeakers, thus making listening to music as easy as possible. It requires no software and instantly sets up its own 2.4 GHz A-to-B connection. It may be connected to multiple sources, as it features both an optical (Toslink) digital input as well as a mini USB digital input, allowing connection to the digital output of myriad audio devices, while two analog inputs - a stereo mini jack for connecting a Smartphone, Tablet or other personal media devices, as well as a set of RCA stereo inputs allowing connection to an existing hi-fi system are on offer. When connected via USB, the Xeo Transmitter doesn't require use of the supplied external power adapter. When connected to Toslink optical cable, or analogue via RCA Stereo cable or 3.5 mm Minijack cable, without any USB connection, however, the Xeo Transmitter must be powered by the compact mains power adapter. A starter set of compatible cables is also included.